Townsville Driveway Cost Calculator.Know what it should cost in Townsville.
Tailored to the Townsville, QLD market, with local pricing adjustment applied automatically. A few quick questions, no obligation.
A new driveway in Townsville typically costs between $3,745 and $23,540 in 2026, with most projects landing around $10,165.
Last reviewed:
Where is the project?
Enter your postcode so we can apply local pricing.
Current estimate: $3,400 to $21,300, likely midpoint $9,200, for Driveway in Townsville.
- LocationTownsville
- Driveway area in m²45 m²
- Driveway materialExposed aggregate
- When are you hoping to start?In 3–6 months
What goes into the number.
We start from a per-m² plain concrete rate and scale by your chosen material, area and site complexity.
- Driveway area in square metres.
- Material — pavers are typically the most expensive, asphalt the cheapest.
- Subgrade preparation — sloped or soft ground adds cost.
- Council crossover (kerb cut) requirements.
Driveway in Townsville.
Townsville pricing is shaped by cyclone-grade compliance requirements and the cost of materials freighted from southern states.
Townsville pricing for a new driveway runs about 7% above the national average of $9,500.
| City | Typical range |
|---|---|
| Brisbane | $3,640–$22,880 |
| Gold Coast | $3,675–$23,100 |
| Sunshine Coast | $3,640–$22,880 |
| Cairns | $3,780–$23,760 |
Frequently asked questions
How much does a new driveway cost in Townsville?
In Townsville, a new driveway typically costs between $3,745 and $23,540 in 2026, with most projects landing around $10,165. Pricing varies with size, finish level, complexity and your specific site.
How long does a new driveway take?
A typical concrete driveway is 2–4 days work plus 5–7 days cure before vehicle use. Paver driveways take longer to lay but are usable sooner.
Do I need council approval?
Replacing an existing driveway typically does not require approval. A new crossover (kerb cut) almost always requires council approval and inspection.
What's usually included in a driveway quote?
Most quotes cover excavation, road base, formwork, reinforcement mesh and the pour or laying itself. Common exclusions are removal of the old driveway, council crossover fees, drainage and sealing, so ask each contractor to itemise these before you compare. Quotes that look cheaper often simply leave more out.
How do site conditions change the job?
A steep block, tight access for trucks and machinery, or soft and reactive soil all add significant cost. Sloped sites need more excavation and usually drainage to keep water away from the house, while soft ground needs a deeper compacted base or a thicker slab. Have contractors inspect the site before giving a fixed price.
How long does a driveway last?
A well-built concrete driveway typically lasts 30 years or more, and pavers can match that with occasional re-levelling. Asphalt is shorter-lived, usually 15 to 20 years with periodic resealing. Longevity mostly comes down to base preparation: premature cracking is usually caused by a poorly compacted subgrade, not the surface material.
Is a driveway a DIY job?
Site preparation and concreting are physically demanding and unforgiving, since a bad pour or poorly compacted base cannot be easily fixed. Most homeowners use licensed concreters or paving trades, and any crossover work on council land must be done by an approved contractor. DIY is realistic only for small paver projects on flat, stable ground.
See local pricing for your city
Each city page includes a local pricing adjustment, assumptions and FAQs.
Related calculators in Townsville
Estimate the cost of new fencing — Colorbond, timber paling, aluminium slat or glass pool fence.
Estimate the cost of garden landscaping — turf, paving, retaining walls, irrigation and planting.
Estimate the cost of a new carport — single, double, attached or freestanding.
Estimate the cost of converting a garage into a habitable room, studio or granny flat.